Results 1 to 4 of 4

Thread: Sirius SCC1 install with aftermarket Sony car stereo

  1. #1
    stumpy555 is offline
    Junior Member
    stumpy555's Avatar
    Joined: Nov 2020 Posts: 2

    Sirius SCC1 install with aftermarket Sony car stereo

    I installed a Sony stereo in my vehicle. It already had a sirius SCC1 in it. The problem is the cable from the SCC1 to the radio does not match the input of the radio. Any thoughts?

  2. #2
    SiriusBuzz is online now
    Head Honcho
    SiriusBuzz's Avatar
    Joined: May 2007 Posts: 2,687
    What model head unit? Do you have the manual? My guess is the manual would specify the part/adapter/jack necessary to connect the two.
    Charles LaRocca
    SiriusBuzz Founder

  3. #3
    stumpy555 is offline
    Junior Member
    stumpy555's Avatar
    Joined: Nov 2020 Posts: 2
    its a xav-ax1000 I have the manual and it does not specify the adapter part number

  4. #4
    SiriusBuzz is online now
    Head Honcho
    SiriusBuzz's Avatar
    Joined: May 2007 Posts: 2,687
    To connect an old SCC1 you need a "synsc1" controller but, as far as I know, it has been discontinued. Your best bet is to find one used on ebay maybe?

    The easy solution would be to scrap the SCC1 and grab the new SiriusXM SXV300v1 -- it will directly connect to your new aftermarket head unit. No need for adapters.

    Full details can be found on this Sony support page.
    Charles LaRocca
    SiriusBuzz Founder

  5. Ad Fairy Senior Member

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •